// products // ANALOGUE radios //

The TSF2000 family is a range of advanced Base Stations for Analogue Communications Systems. The TSF2000 Series is the World's most advanced range of Base Stations for Analogue Communications Systems, which has been designed to be the "preferred choice" of system managers for the replacement or upgrade of existing Base Stations.
It is a slim-line, cost-effective, high performance Base Station for the 21st century with IP ready interfaces and comprehensive remote control facilities.
• High performance in 1/u height, 19” base stations, TSF2025:
• 1-25W cont, and TSF2100: 25-100W cont.
• High environmental specification (-25C to +55C)
• Transmit Duty Cycle 100%, Full duplex
• Modular construction for low MTTR
• Rack or wall mounted
• Microsoft Windows base Programming Tool
• DSP controlled, fully programmable
• PMR frequency bands covered (66-530MHz)
• Completely compatible with SRM9000 Series of Mobile Radios
• In-built loudspeaker for audio monitoring
• Plug replaces FX5000 and PRF10 Base Stations in existing systems with pre-configuration file.
-
Other manufacturers’ products can be plug replaced by using appropriate cables (if required).
• Direct connection to Dispatchers and Control Systems
• 37-way Facilities socket with programmable pin functions
• 2 X 2/4-wire line connect (X2)
• Dual-redundant, speed controlled fans with remote alarms
// Technical Specifications
TSF 2000
Channel Bandwidth : 12.5kHz(11K0F3EJN), 20kHz(14K0F3EJN) or 25kHz (16K0F3EJN) selectable per channel
Frequency Bands : E0 ~ 66-88MHz: AC ~ 136-174MHz: K1 ~ 174-208MHz: R1: ~ 335-375MHz UH: ~ 440-520MHz
Modulation : Freq. F3E (voice) pre-emphasised/flat. Or FFSK data (1200 or 2400bps)
Operating Temp : -25°C to +55°C Operating (Full Spec.)
Antenna Connector : 2 x 50? female N-type
Enviromental : IP20 ingress protection, Humidity 95% non-condensing, Engineers handset (RJ45—front panel), 2 x 2/4 wire line/audio interfaces (screw terminal), 2x line audio connections + E&M signalling (RJ45)
Inputs/Outputs: Programmable facilities connector (37 way D-type), RS232 serial connection (9 way D), Ethernet IP interface (10base T-RJ45), Power connector (5 pin, 25 D-shell)
Supply Voltage : 10.8 to 16.2V DC negative earth (13.65V nominal), CE Type approvals to R&TTE Directive 1999/05/EC
Type Approval : EN300-086 Radio, EN300-113 Data, EN301-489-05 EMC, EN300-219 Sig. EN60950 safety, TBR15 and 17-line, FCC and AS/NZ
Dimensions : 44mm (1U) High x 433mm Wide x 430mm Deep (excluding cables)
-(In Wall Mount) : 125mm High x 465mm Wide x 470mm Deep
Power Requirement : 100V AC/230V AC Mains or 12V DC/24V DC (nominal) for 25W. Additional 24V needed for 100W version
Weight : 6.95 kg
// Call us now
If you wish to discuss your requirements, or just to ask us a few questions call us now on:
01383 736 621
